Описание товара

SYS-1026TT-TF
SuperServer 1026TT-TF (Black)

Motherboards


Super X8DTT-F + Super X8DTT-F

Processor/Cache

CPU
Dual 1366-pin LGA Sockets
Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:

Intel® Xeon® Processor X5600/E5600/L5600 Series
(Westmere) 40W - 130W

Intel® Xeon® Processor X5500/E5500/L5500 Series
(Nehalem-EP) 38W - 95W

QPI
up to 6.4 GT/s

System Memory

Memory Capacity
12x 240-pin DIMM sockets
Supports up to 192 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory
Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
Memory Mirroring supported
Memory Type
1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
1GB, 2GB, 4GB , 8GB** , 16GB**
Memory Voltage
1.5 V
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

On-Board Devices (per Node)

Chipset
Intel® 5500 (Tylersburg) chipset
ICH10R + IOH-36D
SATA
Intel ICH10R SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC
Network Controllers
Intel® 82576 Dual-Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel® I/OAT 3 support for fast, scaleable, and reliable networking
VMDq support for better performance of virtualization
1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
Matrox G200eW 16 MB DDR2
Super I/O
Winbond W83527HG chip
Clock Generator
932S421 chip

Input / Output (per Node)

Serial ATA
Six Serial ATA ports
Six SATA hard drives supported
LAN
2x RJ45 LAN ports
1x RJ45 Dedicated IPMI LAN port
USB
2 rear + 1 header (2 Ports)
4 total USB ports, 2.0 Compliant / 1.1 Compliant
VGA
1x VGA Port
Serial Port
1 Fast UART 16550 serial port

System BIOS (per Node)

BIOS Type
32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
Plug and Play (PnP)
PCI 2.2
ACPI up to 3.0
USB Keyboard support


Chassis

Form Factor
1U Rackmount
Model
CSE-809TQ-1200B

Dimensions

Height
1.7" (43mm)
Width
17.2" (437mm)
Depth
27.75" (705mm)
Gross Weight
40 lbs (18.1kg)
Available Colors
Black

Front Panel (per Node)

Buttons
Power On/Off button
System Reset button
LEDs
Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED

Expansion Slots (per Node)

PCI-Express
1 (x16) PCI-E ( Low Profile)

Drive Bays (per Node)

Hot-swap
4x 2.5" SATA Hot-swap drive bays

SATA Backplane

1U SATA Backplane

System Cooling

Fans
6x Cooling Fans

Power Supply

1200W high-efficiency power supply with PMBus
AC Input
1000W Output @ 100-140V, 11.5-8A, 50-60Hz
1200W Output @ 180-240V, 8-5.5A, 50-60Hz
DC Output
1000W: +12V/83A; +5Vsb/4A
1200W: +12V/100A; +5Vsb/4A
Certification
80 PLUS Gold Certified
[ Test Report ]

Management

Software
IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
SuperDoctor® III
Watch Dog
NMI
Power Configurations
ACPI Power Management
Main Switch Override Mechansim
Power-on mode for AC power recovery

PC Health Monitoring

CPU
Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
CPU Core 6-Phase-switching voltage regulator
FAN
Total of four 4-pin PWM fans
4x fans with tachometer monitoring
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 4x Fan Connectors
PSU I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
LED
Power Fail / Overheat LED
Suspend-state Indicator LED
UID LED
Other Features
SDDC Support

Operating Environment / Compliance

RoHS
RoHS Compliant
Environmental Spec.
Operating Temperature: 10° to 35° C (50° to 95°F)
Non-operating Temperature: -40° to 70° C (-40° to 158° F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)

Информация о производителе: