SuperServer 2028U-TR4+ (Black)
Motherboard
Super X10DRU-i+
Processor/Cache
CPU Intel® Xeon® processor E5-2600 v4/ v3 family (up to 160W TDP)
Dual Socket R3 (LGA 2011)
Cores / Cache Up to 22 Cores / Up to 55MB Cache
System Bus QPI up to 9.6 GT/s
System Memory
Memory Capacity 24x 288-pin DDR4 DIMM slots
Up to 3TB† ECC 3DS LRDIMM, 1.5TB ECC RDIMM/LRDIMM
Memory Type 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes RDIMM: 32GB, 16GB, 8GB, 4GB
LRDIMM: 64GB, 32GB
3DS LRDIMM: 128GB
Memory Voltage 1.2 V
Error Detection Corrects single-bit errors
On-Board Devices
Chipset Intel® C612 chipset
SATA SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2400 BMC
Network Connectivity 4x GbE ports via AOC-2UR68-i4G
Intel® i350 Gigabit Ethernet Controller
1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics ASPEED AST2400 BMC
Input / Output
SATA 10x SATA3 (6Gbps) ports
SAS 24x SAS3 ports support via optional Add-on Cards
LAN 4x Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port
USB 5x USB 3.0 ports
(2 rear, 2 onboard header, 1 Type A)
Video 1x VGA Connector
Serial Port / Header 1x Serial header
DOM 2x SuperDOM (Disk on Module) ports
System BIOS
BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features Plug and Play (PnP)
APM 1.2
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
SMBIOS 2.7.1
UEFI 2.3.1
Management
Software SuperDoctor® 5
Intel® Node Manager 3.0
Watch Dog
NMI
SUM and SSM
Optional IPMI 1.5 / 2.0
Power Configurations ACPI Power Management
Power-on mode for AC power recovery
Chassis
Form Factor 2U Rackmount
Model CSE-219UAC-R1K02-T
Dimensions and Weight
Width 17.2" (437mm)
Height 3.5" (89mm)
Depth 27.76" (705.3mm)
Weight Net Weight: 36 lbs (16.4 kg)
Gross Weight: 72 lbs (32.7 kg)
Available Colors Black
Front Panel
Buttons Power On/Off button
System Reset button
LEDs Power status LED
HDD activity LED
2x Network activity LEDs
System information (overheat/UID) LED
Expansion Slots
PCI-Express 1x PCI-E 3.0 x16 slot (FH, 10.5" L)
7x PCI-E 3.0 x8 slots
(5x FH, 10.5" L, 1x LP, 1x Internal LP)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Drive Bays
Hot-swap 24x Hot-swap 2.5" Drive Bays:
10x SATA3 ports by default
Optional drive support: 24x SAS3
Note: optional storage card is required to support more than 10 drives.
Backplane
2U SAS/SATA backplane
System Cooling
Fans 4x 8cm heavy duty PWM fans
Power Supply
1000W Redundant Power Supplies with PMBus
Total Output Power 800W/1000W
Dimension
(W x H x L) 73.5 x 40 x 203 mm