specifications
Processor
Dual mPGA604 ZIF sockets; onboard EVRD 10.1
Supports Dual-Core IntelR XeonR processors
"Nocona" processors supported
IntelR EM64T support;
Front-Side Bus support for 800MHz
Chipset
IntelR E7320 ("Lindenhurst-VS") chipset
MCH North Bridge and ICH5R South Bridge chips
One PXH I/O Bridge chip
Winbond W83627HF Super I/O chip
Memory
Eight DDR-333/266 DIMM sockets
Supports up to 16GB of Registered ECC memory
Expansion Slots
One PCI-X 133/100/66 MHz slot
One PCI-X 100/66 MHz slot
Two PCI-X independent buses
One proprietary 200-pin TAROT SO-DIMM
connector (on PCI-X bus)
Integrated I/O
One floppy connector for up to two drives
Six USB 2.0 ports (two rear, four front via cable)
Two 9-pin UART serial support (1 via cable, opt.)
One 25-pin ECP/EPP parallel header
PS/2 mouse and keyboard stacked connectors
Integrated PCI IDE
Provides two PCI bus master channels for
up to four UDMA IDE devices
Supports UDMA 100/66/33 IDE & ATAPI devices
Integrated Serial ATA
Provides independent DMA operation on 2 ports
Data transfer rates up to 1.5 GB/sec.
Supports RAID 0 or 1 (with 82801 ER/ICH5R chip)
Adaptec's driver and option ROM
System Management
ADI ADT7463 H/W Monitor IC
Six 3-pin system fan headers
Three 4-pin (3-pin compatible) fan connectors
Tachometer monitoring and PWM control
One 2-pin chassis intrusion header
Temperature and voltage monitoring
Watchdog timer; optional TYAN M3289 or
M3290 SMDC (Server Management Daughter
Card) IPMI 1.5 via 2x25 header
Integrated LAN Controller
Dual 10/100/1000 GbE LAN ports
Intel 82546GB controller
Supports ASF 1.0 or IPMI 1.5
Two RJ45 connectors with LEDs
Integrated Video
ATIR RAGET XL PCI graphics controller
8MB Frame Buffer of video memory
Optional Modules (SMDC/TSO Support)
Riser support
- Tyan M2044 (2U Riser w/ 3 PCI-X slots)
- Tyan M2360 (2U Riser w/ 3 PCI-X slots
in 3 independent PCI-X 133 MHz buses)
- Tyan M2364 (2U Riser with one PCI-Exp
x4 slot and two PCI-X slots)
- Tyan M2033 1U riser
M8110 /M8120 - SATA RAID module (optional)
- Adaptec/Marvell 64-bit PCI-X SATA-I controller
- Eight or four 1.5 GB/s SATA ports
- High-performance command queuing w/ EDMA
support
- Supports SATA RAID 0, 1, 10
- Adaptec ZCR support
M7902 - SCSI module (optional)
- Adaptec AIC-7902 dual-channel Ultra320
- SCSI controller - operates at 64-bit PCI-X bus
- Supports IntelR's RAIDIOST and Adaptec's
- Zero-Channel RAID logics
- Supports Adaptec's HostRAIDT
- Two 68-pin SCSI connectors
BIOS
Phoenix BIOS 8 Mb flash ROM
Supports ACPI Power Management: S1, S4 & S5
Auto detection of memory size
Auto configuration of IDE hard disk types
User settings of hardware monitoring
Multiple boot options including PXE
Supports console re-direction
Form Factor
Extended ATX (12" x 13"; 305mm x 330mm)
One EPS ATX/12V 24-pin system power connector
One SSI EEB v3.51 compliant 8-pin split CPU
power connector
Serial (1), parallel (1) and VGA (1) connectors
Stacked USB (2) ports
RJ-45 connectors
Stacked PS/2 keyboard and mouse connectors
Regulatory
FCC Class B (Declaration of Conformity)
European Community CE