specifications
Processor
Dual чPGA 940-pin ZIF sockets
Up to two AMD OpteronT 200 series processors
Supports Single and Dual Core processors
Two onboard 3-phase VRMs
128-bit DDR dual-channel memory controller
(integrated in CPU)
Chipset
AMD-8131T HyperTransportT PCI-X Tunnel
AMD-8111T HyperTransportT I/O Hub
WinbondT W83627HF Super I/O ASIC
Analog Devices ADM1027 Hardware Monitoring IC
Memory
128-bit dual channel memory bus
Eight 184-pin 2.5-Volt DDR DIMM sockets
Supports up to 32GB of Registered DDR
Supports ECC type memory modules
Supports DDR 266/333/400
Supports Single/Dual/Quad Rank mem. modules
Expansion Slots (Total of five usable slots)
Two independent 64-bit PCI-X buses
- Two 100/66/33 MHz PCI-X slots at
PCI-X bus A
- Two 133/100/66/33 MHz PCI-X slots at
PCI-X bus B
One legacy 32-bit 33 MHz (5V) PCI slot
Back Panel I/O Ports
Stacked PS/2 mouse and keyboard ports
Stacked two USB v1.1 ports + 1 RJ45 10/100
Base-T port w/ activity LED
One 9-pin UART serial port
One 15-pin VGA port
Two RJ45 10/100/1000 Base-T ports with
activity LED
Integrated I/O
One floppy connector supports up to two drives
One 9-pin serial ports connector
One 25-pin parallel port connector
Four USB v1.1 ports
Three front panel LAN activity LED connectors
System Management
Two 3+1-pin CPU fan header with tachometer
input and smart fan control (PWM)
Five 3-pin system fan headers with tachometer
input, three of them with smart fan control
One 2-pin Chassis Intrusion header
Temperature, voltage and fan monitoring
Watchdog timer
Integrated PCI Graphics
ATIR RAGET XL PCI graphics controller
8MB Frame Buffer of video memory
Integrated LAN Controllers
Broadcom BCM5704C dual-channel GbE
- Two RJ-45 LAN connectors with LEDs
- Connected to PCI-X Bridge A
Intel 82551QM 10/100 LOM
- Operating at 32-bit/33MHz PCI bus
Integrated Enhanced IDE Controller
Dual IDE channels supports up to four EIDE
devices
Supports for UDMA 33/66/100/133 IDE drives
and ATAPI compliant devices
Integrated SATA Controller
Silicon Image Sil3114 SATA RAID Accelerator
Supports S-ATA 1.0 specification
Supports 4 channel SATA port for up to four
SATA devices
Supports RAID 0, 1, 0+1
Connected to legacy 32-bit 33MHz PCI bus
Integrated Dual Channel SCSI (option)
Adaptec AIC-7902W Dual-Ch.
U320 SCSI controller
Connects to PCI-X Bridge A
AdaptecR ZCR card support
Intelligent Platform Management Interface Header
TYAN Server Management Daughter card
(optional) supports features listed below via
IPMI header ( SMDC/TSO Support)
Baseboard Management Controller (BMC)
Tailored for IPMI
Supports KCS and BT styles
Flexible Windows/Linux Management Solution
Supports RMCP and SNMP protocols
Supports ASF standard and EMP
I2C serial multi-master controllers and UARTs
Build-in IPMB connector
Remote power on/off and reset support
(IPMI-over-LAN)
BIOS
AMIR BIOS 8.0 on 4Mbit LPC Flash ROM
Supports APM 1.2 & ACPI 1.0
Power Management S1, S4, and S5 support
Form Factor
Extended ATX footprint
(13" x 12", 304.8 x 330.2 mm)
EPS12V universal power connectors
Regulatory
FCC Class B (Declaration of Conformity)
CE (Declaration of Conformity).