| 
 
 
 375700 руб.2890.00 y.e.
 
 
 |  | 
 Supermicro SYS-1026TT-iBXF Twin; 1U, 2x(2-Nehalem; 4x2.5" SAS; upto 48 GB 1333 DDR3 ECC Reg, IB 20G)
 
 
 Описание товара SYS-1026TT-IBXF	SuperServer 1026TT-IBXF (Black)
 
 Motherboards
 
 
 Super X8DTT-IBXF + Super X8DTT-IBXF
 
 Processor/Cache
 
 CPU
 Dual 1366-pin LGA Sockets
 Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
 
 Intel® Xeon® Processor X5600/E5600/L5600 Series
 (Westmere) 40W - 130W
 
 Intel® Xeon® Processor X5500/E5500/L5500 Series
 (Nehalem-EP) 38W - 95W
 
 QPI
 up to 6.4 GT/s
 
 System Memory
 
 Memory Capacity
 12x 240-pin DIMM sockets
 Supports up to 192 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory
 Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
 Memory Mirroring supported
 Memory Type
 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
 DIMM Sizes
 1GB, 2GB, 4GB , 8GB** , 16GB**
 Memory Voltage
 1.5 V
 Error Detection
 Corrects single-bit errors
 Detects double-bit errors (using ECC memory)
 Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
 
 On-Board Devices (per Node)
 
 Infiniband
 Mellanox ConnectX-2 DDR Infiniband 20Gbps Controller
 Chipset
 Intel® 5520 (Tylersburg) chipset
 ICH10R + IOH-36D
 SATA
 Intel ICH10R SATA 3.0Gbps Controller
 RAID 0, 1, 5, 10 support
 IPMI
 Support for Intelligent Platform Management Interface v.2.0
 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
 Nuvoton WPCM450 BMC
 Network Controllers
 Intel® 82576 Dual-Port Gigabit Ethernet Controller
 Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
 Intel® I/OAT 3 support for fast, scaleable, and reliable networking
 VMDq support for better performance of virtualization
 1x Realtek RTL8201N PHY (dedicated IPMI)
 Graphics
 Matrox G200eW 16 MB DDR2
 Super I/O
 Winbond W83527HG chip
 Clock Generator
 932S421 chip
 
 Input / Output (per Node)
 
 Serial ATA
 Six Serial ATA ports
 Six SATA hard drives supported
 LAN
 2x RJ45 LAN ports
 1x RJ45 Dedicated IPMI LAN port
 USB
 2 rear + 1 header (2 Ports)
 4 total USB ports, 2.0 Compliant / 1.1 Compliant
 VGA
 1x VGA Port
 Serial Port
 1 Fast UART 16550 serial port
 Infiniband
 1 External QSFP Infiniband Connector
 
 System BIOS (per Node)
 
 BIOS Type
 32Mb SPI Flash EEPROM with AMI® BIOS
 BIOS Features
 Plug and Play (PnP)
 PCI 2.2
 ACPI up to 3.0
 USB Keyboard support
 
 
 Chassis
 
 Form Factor
 1U Rackmount
 Model
 CSE-809TQ-1200B
 
 Dimensions
 
 Height
 1.7" (43mm)
 Width
 17.2" (437mm)
 Depth
 27.75" (705mm)
 Gross Weight
 40 lbs (18.1kg)
 Available Colors
 Black
 
 Front Panel (per Node)
 
 Buttons
 Power On/Off button
 System Reset button
 LEDs
 Power LED
 Hard drive activity LED
 2x Network activity LEDs
 System Overheat LED
 
 Expansion Slots (per Node)
 
 PCI-Express
 1 (x16) PCI-E ( Low Profile)
 
 Drive Bays (per Node)
 
 Hot-swap
 4x 2.5" SATA Hot-swap drive bays
 
 SATA Backplane
 
 1U SATA Backplane
 
 System Cooling
 
 Fans
 6x Cooling Fans
 
 Power Supply
 
 1200W high-efficiency power supply with PMBus
 AC Input
 1000W Output @ 100-140V, 11.5-8A, 50-60Hz
 1200W Output @ 180-240V, 8-5.5A, 50-60Hz
 DC Output
 1000W: +12V/83A; +5Vsb/4A
 1200W: +12V/100A; +5Vsb/4A
 Certification
 80 PLUS Gold Certified
 [ Test Report ]
 
 Management
 
 Software
 IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
 SuperDoctor® III
 Watch Dog
 NMI
 Power Configurations
 ACPI Power Management
 Main Switch Override Mechansim
 Power-on mode for AC power recovery
 
 PC Health Monitoring
 
 CPU
 Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
 CPU Core 6-Phase-switching voltage regulator
 FAN
 Total of four 4-pin PWM fans
 4x fans with tachometer monitoring
 Status monitor for speed control
 Status monitor for on/off control
 Low noise fan speed control
 Temperature
 Monitoring for CPU and chassis environment
 CPU thermal trip support
 Thermal Control for 4x Fan Connectors
 PSU I2C temperature sensing logic
 Thermal Monitor 2 (TM2) support
 PECI
 LED
 Power Fail / Overheat LED
 Suspend-state Indicator LED
 UID LED
 Other Features
 SDDC Support
 
 Operating Environment / Compliance
 
 RoHS
 RoHS Compliant
 Environmental Spec.
 Operating Temperature: 10° to 35° C (50° to 95°F)
 Non-operating Temperature: -40° to 70° C (-40° to 158° F)
 Operating Relative Humidity: 8% to 90% (non-condensing)
 Non-operating Relative Humidity: 5 to 95% (non-condensing)
 
 
 Информация о производителе:  |