Optimized for 1U environments and built to perform, the Thunder K8SRE (S2891) delivers exceptional performance to meet the demands of any server application. Based on the NVIDIA nForceT Professional 2200 core-logic solution, the Thunder K8SRE (S2891) also features support for dual AMD OpteronT 200 series processors with 32-bit and 64-bit power. Strategically-positioned PCI Express x16 and PCI-X slots, plus features such as Serial ATA-II with NVIDIA NVRAIDT , and hardware monitoring support all add up to a compelling package to meet any server system requirement.
Specifications
Processor
Dual чPGA 940-pin ZIF sockets
Two onboard 4-phase VRM
Supports up to two AMD OpteronT 200 processors
Three HyperTransportT links support up to
8.0GB/s data transfer rate each link
144-bit DDR interface (128-bit data + 16 bit ECC)
Scalable 32bit & 64bit computing
Secure computing with Nx register support
Supports Single and Dual Core processors
Chipset
AMD-8131T HyperTransportT PCI-X Tunnel
NVIDIA nForceT Prof. 2200 (CrushK8-04 Pro)
WinbondT W83627HF Super I/O ASIC
Analog Devices ADT7463 Hardware Monitoring IC
Memory
128-bit dual channel (interleaved) memory bus
Total eight DDR DIMM sockets (four per CPU)
Supports up to 32GB of Registered DDR
Supports Single/Dual/Quad Rank mem. modules
Supports DDR 266/333/400 memory
Supports ECC with CHIPKILL Technology
Expansion Slots
One PCI Express x16 slot with 1U riser support:
- Other riser solutions in development
One Tyan TARO SO-DIMM 100MHz (PCI-X B)
One PCI-X 100MHz slot (Bridge B)
Total of three usable slots
* NOTE: Use of PCIe x16 riser is necessary for installation of PCIe x16 add-on cards! See this matrix for details: Tyan Riser Card Matrix
Integrated I/O
One floppy connector
One parallel port header and two serial
(one connector, one header)
Six USB 2.0 ports
(two rear connector & four front panel headers)
One 15-pin VGA connector
PS/2 mouse and keyboard connectors
System Management
Total of ten 3-pin fan headers with PWM support
Seven fan headers with tachometer
(four from ADT7463 three from W83627HF)
One 2-pin Chassis Intrusion header
Temperature, voltage and fan monitoring
Port 80h LED 7-segment display
Integrated LAN Controller
One Broadcom BCM5704 dual port GbE LAN
- Two RJ-45 LAN connectors with LEDs
- Connected to PCI-X Bridge A (133MHz)
Two Front Panel LED headers
Integrated PCI Graphics
ATIR RAGET XL 8MB PCI graphics controller
Integrated Enhanced IDE Controller
Two IDE ports for up to four EIDE devices
Supports ATA-133 IDE drives & ATAPI devices
Integrated SATA Controller
Two integrated dual port SATA-II controllers
Four SATA-II ports support up to four drives
Supports 3.0Gb/s per port; RAID 0, 1, 0 + 1
NvRAIDT v2.0 support
Intelligent Platform Management Interface Header
TYAN Server Management Daughter card
(optional) supports features listed below via
IPMI header
Baseboard Management Controller (BMC)
Tailored for IPMI
Supports KCS and BT styles
Flexible Windows or Linux Management Solution
Supports RMCP and SNMP protocols
Supports ASF standard and EMP
I2C serial multi-master controllers and UARTs
Build-in IPMB connector
Remote power on/off and reset support
(IPMI-over-LAN)
BIOS
Phoenix BIOS on 8Mbit LPC Flash ROM
Supports ACPI 2.0 and SRAT
Supports PXE via Ethernet, USB device boot
SMBIOS 2.3.1, BBS 1.1 compliant
Headless Operation via serial console redirect
48-bit LBA Support
Form Factor
Extended ATX (12"x13"; 304.8x330.2mm)
SSI 3.0/3.51 (24pin + 8pin) power connectors
Serial (one) and VGA (one) connectors
Stacked USB 2.0 (two) connectors
Stacked PS/2 keyboard and mouse connectors
Two RJ-45 LAN connectors with LEDs
Regulatory
FCC Class B (DoC)
European Community CE (DoC)
(495) 925-00-61 